Installing a Universal Comm. Kit
Example of IN/OUT sensor installation 1
1. Chcek the sensor and sensor holder you will attach.
NOTE
IN sensor (Red)
OUT sensor
(Blue)
2. Brazing the sensor holder to the selected location of a pipe.
Brazing a sensor
•
NOTE
•
the surface of the pipe.
• Check whether the sensor you will attach is IN or
•
sensor holder length.
3. Insert the sensor and the clip into the sensor holder.
4.
5. Attach the insulator around the attached sensor.
28
Diameter of a
Diameter of a
sensor holder
sensor (in(mm))
(in(mm))
Sensor holder
Insulator
IN/OUT sensor
Pipe
Sensor holder
IN/OUT sensor
Clip for sensor
Insulator