Samsung MCM-D211UN Installation Manual page 37

Option
Explanation
Remote
Controller
Display
Indication Details
Indication and
Details
Fan stops when thermostat is off in Cool mode.
Make sure to connect the wired remote controller or the external room temperature sensor if you use the
functions the option of using temperature sensor inside the wired remote controller must be set. Refer to
the installation manual of the wired remote controller.
contact control will not be output.
output for Thermo ON is not generated (e.g. defrosting operation).
output is generated with Thermo ON.
generated with cooling Thermo ON.
When Cool or Dry mode is off. The indoor fan operate in setting minutes.
Offset of compensation for Oil return/EEV step of
heating installation stopped defrost mode
Indication Details Indication Details Indication
Default
Forced
Heating and Cooling
Details
Cooling Fan Heating Fan
Setting Setting
Disuse Disuse
Use (Fan: User
Default
Disuse
setting)
value
Disuse
Use (Fan: High)
Disuse
Use (Fan: Low)
Use (Fan: User
Disuse
setting)
Use (Fan: User Use (Fan: User
setting) setting)
Use (Fan: User
Use (Fan: High)
setting)
Use (Fan: User
Use (Fan: Low)
setting)
Noise
Disuse
Use (Fan: High)
decreasing
Use (Fan: User
Use (Fan: High)
setting
setting)
Use (Fan: High) Use (Fan: High)
B
Use (Fan: High) Use (Fan: Low)
C Disuse
Use (Fan: Low)
Use (Fan: User
D
Use (Fan: Low)
setting)
E
Use (Fan: Low) Use (Fan: High)
F
Use (Fan: Low) Use (Fan: Low)
The contact output is
Indoor unit type
Details
Indication
Model Enthalpy Fan
type S/S Motor
Common Disuse Fixed
Disuse Fixed
Common Use Fixed
Use Fixed
Common Disuse Variable
Disuse Variable
Common Use Variable
Use Variable
37