Table of Contents
Advertisement
Installing a Universal Comm. Kit
Installing EEV Assembly (Not provided)
1. Check that EEV Assembly is installed inside the indoor unit.
where condensate water can be drained.
2. Check whether IN and OUT pipe connection is correct.
3. Essential to check the EEV Assembly main body is installed vertically.
4.
Clamp (Work area for indoor unit
manufacturer)
Insulator (Work area for indoor unit
manufacturer)
A
B
B: Low pressure pipe to indoor unit heat exchanger (OUT)
5. For checking EEV service, please attach a label sticker.
sticker to valve wire housing.
6. Connect the EEV termial block to exact places on PCB according to set capacity.
18
A
Insulator
Clamp
Standard for vertical
Standard for vertical
installation
installation
Advertisement
Table of Contents
