Table of Contents
Advertisement
Setting an address and installation option of Universal Comm. Kit
13.
Press Low Fan button(
Press High Fan button(
Each time you press the button,
14. Setting Dry mode
Press
button to be change to Dry mode in the OFF status.
15.
Press Low Fan button(
Press High Fan button(
Each time you press the button,
16. Setting Fan mode
Press
button to be change to Fan mode in the OFF status.
Press Low Fan button(
Press High Fan button(
Each time you press the button,
18. Setting Heat mode
Press
19.
Press Low Fan button(
Press High Fan button(
Each time you press the button,
Step 3. Checking the option you have set
Step 4. Entering an option
Press the operation button
For the correct option setting, You must press the on/off button two time shortly.
Step 5. Checking operation
Press the power reset button or the reset button of an outdoor unit to reset the settings.
Take the batteries out of the remote controller and insert them again and then press the
32
will be selected in rotation.
will be selected in rotation.
will be selected in rotation.
will be selected in rotation.
button to check whether the option code you have entered is correct or not.
with the direction of a remote controller to set.
Status
button.
Advertisement
Table of Contents
