Drive And Bearing Housing Installation - Graco Mark IV 249636 Operation - Repair - Parts

Drive and Bearing Housing Installation

Make sure gear (89) and thrust
washers (28, 30, 90a, 36) are in
place. Brush grease onto gear
teeth.
Drive and Bearing Housing Installation
Drive and Bearing Housing Installation
32
1 Push drive housing (90) onto motor (84) and install with five
screws (6). Torque to 190-210 in-lb (21-23 N·m).
1
1
Repair
2 Install bearing housing (83)
with four screws (14) and
washers (12). Torque to
25-30 ft-lb (34-40 N·m).
2
2
311287A