Configuration - Endress+Hauser Tankvision Multi Scan NXA83 Operating Instructions Manual

Tankvision
Endress+Hauser
When a NXA83 is rebooted, it always starts in automatic redundant selection.
4.5

Configuration

The first step to configuring a redundant database on the Multi Scan NXA83 is to configure
the redundancy mode. This is set using the Port Configuration module in the
Communications menu.
Click on the Host Comms tab, and set the Redundancy Settings to Switch By System.
Switch By System
NXA83_Display_Redundancy_Fixed
11