fantastic furniture Cove Hall Table Assembly Instructions Manual page 6

Step 3
You will need
2 x Cam Nuts Phillips Head
(H4) Screwdriver
Insert 2 x Cam Nuts (H4) into Rail (P6) as shown. Rotate the cam nuts so the arrow points
towards the incoming cam bolts. Attach Left & Right Side Panel (P3 & P4) to Rail (P6) by
tightening with the Phillips Head Screwdriver.
Step 4
You will need
4 x Dowels
4 x Cam Nuts
(H1)
(H4)
3 x Screws
Phillips Head
(H2)
Screwdriver
Insert 4 x Dowels (H1) into
Top Panel (P1). Insert 4 x Cam
Nuts (H4) into Left & Right Side
Panel (P3 & P4) as shown. Rotate
the cam nuts so the arrow points towards the incoming
cam bolts. Attach Left & Right Side Panel (P3 & P4) to Top Panel (P1) by tightening
with the Phillips Head Screwdriver. Attach Rail (P6) to Top Panel (P1) with 3 x
Screws (H2). Tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au
Countersink face up.
H4
(P3)
(P4)
H1
H1
(P6)
This is how a cam nut works........
H4
H2
H2
(P6)
H4
(P1)
(P4)
H4
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P3)
H1
H2 H4
H1
Page 6