Cleanup - Graco MAGNUM X5 Manual

Cleanup

1. Engage gun trigger lock.
2. Turn OFF power switch. Turn Prime/Spray
valve to PRIME.
ti2018a
3. Place prime tube in waste pail. Submerge suc-
tion tube in water or compatible solvent for
non-water based material.
4. Turn ON power switch. Align arrow on sprayer
and bucket symbol on pressure control knob.
3A1775C
ti2048a
ti2019a
ti2050a
ti2028a
5. While pump continues to stroke, remove trigger
lock. Trigger gun into paint pail. Turn
Prime/Spray valve to SPRAY. Continue to trig-
ger gun until flushing fluid comes out of gun.
Release trigger.
NOTE: To minimize splashing, aim gun at
inside wall of empty waste pail.
6. Move gun to waste pail. Trigger gun until
remaining flushing fluid is gone from flushing
pail. Release gun trigger.
7. Fill unit with Pump Armor or mineral spirits. See
Cleanup, page 17.
Cleanup
ti2051a
ti2052a
17