Clear Tip Clog
In the event that particles or debris clog the
spray tip, this sprayer is designed with a
reversible spray tip that quickly and easily
clears the particles without disassembling the
sprayer.
1.
Engage trigger lock. Rotate spray tip to
unclog position. Disengage trigger lock.
Trigger gun at waste area to clear clog.
1
NOTE: If spray tip is difficult to rotate when
turning to the unclog position, perform
Pressure Relief Procedure, page 12, then
turn Prime/Spray valve to spray position and
repeat step 1.
2.
Engage trigger lock. Rotate spray tip
back to spray position. Disengage trig-
ger lock and continue spraying.
3A4193B
Cleanup
1.
Perform Pressure Relief Procedure,
page 12.
2.
Remove tip guard and Spray Tip. For
additional information, see separate gun
manual.
3.
Remove fluid intake and drain tube from
paint, wipe excess paint off outside.
ti29119a
Operation
ti29459a
ti24709a
19