Tools Included; Tools Needed - Salamander D1/347A Assembly Instructions Manual

TOOLS INCLUDED

PART # DESCRIPTION
P-400-030 Driver Bit 1/4" Hex Key
400-030 1/4" Hex Key
400-070 1/8" Hex Key
400-080 5/32" Hex Key
400-058 3/16" Hex Key- Short Arm
warnings
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS FURNISHING
WARNING! Failure to comply with these instructions may result in accident involving serious personal
injury. Failing to follow these instructions can result in the product being damaged or being destroyed or
voiding of the warranty.
CAUTION!
• Close supervision is necessary when this furnishing is used by or near children, invalids,
or disabled persons
• Use this furnishing only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer.
• Do not use outdoors
• For Commercial Use Only
Accessories and Spare Parts
Please contact Salamander Designs 860.761.9500 or www.salamanderdesigns.com/commercial
Salamander 4 Bay Low Profile Wall Mount Cabinet
***** SAVE THESE INSTRUCTIONS

Tools needed

Drill Driver
#2 Phillips Head Screw Driver
1/2 Drill Bit for Standard Installation
3/16" Drill Bit for Wood Stud Installation
3/8" Drill Bit for Masonry Installation
Pencil
Tape Measure
Level
*****
3 of 10 503-248 [5.17]