Table of Contents
Advertisement
Remove
Loosen screws on both sides.
Then tilt rack until the hook is
free and lift up until the rack is
free from bottom screw.
NOTE: It is important that cabinet is level before adjusting doors, see step 2.
B
Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter any problem with your
Full warranty including limitations and warranty claim information may be found at www.salamanderdesigns.com/commercial/warranty
Salamander 4 Bay Low Profile Wall Mount Cabinet
ADJUSTMENT TIPS
3U Vertical Rack
A
Main Adjustment (Side to Side and Up/Down)
A
Adjustment is made by turning screw (A) in and out.
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS AND MOUNTS
Salamander product, let us know. We are here to make it right. 1.860.761.9500
Re-Install
Slide the slotted ends of the
rack over the bottom screw and
hook the top screw as shown.
DOORS
Adjust the tops of the doors to be
parallel to the top of the cabinet.
Door Front
Dismount Hinge from Hinge Plate
With one hand holding the door open, pull
back on the hinge quick-release lever (B).
Made in USA
10 of 10
Tighten with provided
B
Hex Key.
A
A
A
503-248 [5.17]
Advertisement
Table of Contents
