Connection Of Supply Voltage And Sensor - Grundfos SI 010 CNV Installation And Operating Instructions Manual

4.2.1 Connection of supply voltage and sensor

13 15
Fig. 10 Electrical connection, earthing and connection of control box
Terminal Description
Phase conductor 230/115 VAC (be sure to configure short-
13
circuit position ST5 if it is a 115 V supply).
15 Neutral
17 Protective earth conductor (PE)
Output 1 (4-20 mA or 2-10 V depending on the position of the
21
jumper in position ST1)
22 Earth
Output 2 (4-20 mA or 2-10 V depending on the position of the
23
jumper in position ST2)
24 Earth
17 21 22 23 24
15