Related Manuals for Forever Redwood ARCHED THICK TIMBER PAVILION
Summary of Contents for Forever Redwood ARCHED THICK TIMBER PAVILION
- Page 1 866.332.2403 (TOLL FREE) (707) 640.29.05 (Option 4) Direct Line for the Design Department; 7am – 7pm Pacific Time, Monday-Saturday ASSEMBLY INSTRUCTIONS FOR THE ARCHED THICK TIMBER PAVILION...
- Page 2 Insert the carriage bolts into the holes and lightly tap with a hammer until the square neck fit in the wood piece and the bolt head must flush with the wood piece. Finally, place the washer and the nut and carefully tighten it using a ratchet with the necessary socket or a wrench. P| 1 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 3 Place the washers in their lag bolts. After that, insert the lag bolts into the holes and carefully tighten it using a ratchet with the necessary socket. Use the washers only for the Wood Pieces. To install the deck screws. Insert the deck screws into the holes and carefully tighten it using a drill. P| 2 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 4 P| 3 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 5 P| 4 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 6 P| 5 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 7 Step 2: First attach the single supports (2) to the posts with 3/8´´ X 8´´ bolts (B). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3/8´´ X 8´´ Bolts 3/8´´ X 8´´ Bolts P| 6 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 8 (4) to the posts with 3/8´´ x 12´´ bolts (C) and the double main knee braces to the post with 3/8´´ x 16´´ bolts (D). Finally, use 3/8´´ x 8´´ bolts (B) to attach the main knee braces to the support. 3/8´´ X 16´´ Bolts 3/8´´ X 12´´ Bolts 3/8´´ X 8´´ Bolts P| 7 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 9 (G). After that, use 3/8´´ x 7´´ bolts (F) to attach the central arched rafter (5) to the post. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3/8´´ X 7´´ Bolt 8´´ X 3´´ Deck Screws 3/8´´ X 7 ½ ´´ Bolt P| 8 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 10 Step 7: Attach the hanger (12) to the in-between blocking with 3/8´´ x 3 ½´´ lag bolts (J). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3/8´´ X 3 ½ ´´ Bolts P| 9 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 11 Step 9: Attach the ceiling fan base (7) to the rafters with 5/16´´ x 3 ½´´ lag bolts (L). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 3 ½ ´´ Bolts P| 10 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 12 Step 11: Use 3´´ deck screws (G) to attach the facias (9) to the rafters. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3´´ Deck Screws P| 11 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
- Page 13 This completes the Pavilion assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you. P| 12 ARCHED THICK TIMBER PAVILION www.ForeverRedwood.com...
Need help?
Do you have a question about the ARCHED THICK TIMBER PAVILION and is the answer not in the manual?
Questions and answers