Page 5
Step 1: Use 5/16´´ x 4´´ bolts (A) to attach the long walls (2) to the floor (1). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 4´´ Bolts Step 2: Attach the short walls (3) to the long walls with 5/16´´...
Page 6
Step 3: Use 1 ¼´´ deck screws (C) to attach the lid (4) to the long wall. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 1 ¼´´ Deck Screws Step 4: Joint the pistons to the lids. Or, attach the chains to the walls. Piston Chain P| 5...
Page 7
Step 5: Attach the legs (5) to the short walls with 5/16´´ x 3 ½´´ bolts (B), as shown below. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16” X 3 ½” Bolts Step 6: Finally, use 5/16´´...
Page 8
This completes the Storage Bench assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you. P| 7 ALAN´S REDWOOD STORAGE BENCH www.ForeverRedwood.com...
Need help?
Do you have a question about the ALAN'S REDWOOD STORAGE BENCH and is the answer not in the manual?
Questions and answers