Page 5
Then add a washer and nut and lightly tighten. Each part has a series of numbers that indicate where to attach the part with the corresponding number 3/8´´ X 8´´ Bolts 5/16´´ X 5 ½´´ Bolts ADIRONDACK CHAIN GLIDERS www.ForeverRedwood.com P| 4...
Page 6
Then add a washer and nut and lightly tighten. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 3 ½´´ Bolts ADIRONDACK CHAIN GLIDERS www.ForeverRedwood.com P| 5...
Page 7
Step 6: Finally, with someone helping you, use quick links (F) and chains (E) to join the seat glider to the frame glider. Take a few minutes to adjust the chain height to your preference. Chains & Quick Links ADIRONDACK CHAIN GLIDERS www.ForeverRedwood.com P| 6...
Page 8
This completes the assembly of the Two Seat Adirondack Glider; I hope you enjoy your set for many decades. If you ever have a problem or question, do not hesitate to call us (866 332 2403) or send us an email. We are here to support you. ADIRONDACK CHAIN GLIDERS www.ForeverRedwood.com...
Need help?
Do you have a question about the ADIRONDACK CHAIN GLIDERS and is the answer not in the manual?
Questions and answers