Advertisement
Step 1
You will need
2 x Screws
( H2 )
Insert 1 x front rail ( P5 ) into the corresponding holes on the 2 x front legs ( P3 ).Secure together
using 2 x screws ( H2 ),tightening with allen key ( H4 ).
Do not fully tighten screws. Leave them a little loose at this stage.
Step 2
You will need
4 x Washers
4 x Bolts
( H1 )
Allen key
( H4 )
Attach the assembled leg frame to the seat ( P2 ) as shown. Secure together using 4 x
bolts ( H1 ) and 4 x washers ( H3 ),tightening with the allen key ( H4 ).
Do not fully tighten bolts. Leave them a little loose at this stage.
fantasticfurniture.com.au
Allen key
( H4 )
Note
a soft surface to minimise the risk of damaging the chair.
( H3 )
( P3 )
we strongly recommend assembling the stool on
:
( P2 )
( H2 )
( P5 )
( H3 ) ( H1 )
Page 5
Advertisement
