Network Camera Configuration; System Configuration; Basic Information; Date And Time - Genie WIPX2LBVLPR User Manual

2mp h.265 ip lpr camera with 7-22mm motorised lens with 50m ir

Hide thumbs Also See for WIPX2LBVLPR:

Table of Contents

Network Camera User Manual

4 Network Camera Configuration

In the Webcam client, choose "Config" to go to the configuration interface.

Note: Wherever applicable, click the "Save" button to save the settings.

In the "Basic Information" interface, the system information of the device is listed.

Some versions may support device ID and QR code. If P2P is enabled (see Network

Configuration-P2P), the network camera can be quickly added to mobile surveillance client,

by scanning the QR code or entering device ID.

Go to ConfigSystemDate and Time. Please refer to the following interface.

Table of Contents