Advertisement
Installation (cont.)
Decor Star
7. Hang the unit on the wall to complete the
installation. Make sure the unit is seated
properly. Apply silicon sealant on left and
right sides of the shower panel. (NOTE: do
not seal the bottom of the panel, this will
allow any possible future leaks to drain out
the panel)
8. Connect hand shower hose to the main
panel body. Attach the hand shower to the
hose. (NOTE: Install the rubber washer to
prevent leak.)
9. Place the hand shower cradle at desired
location (preferably on the left side of the
panel) and follow step 4 when drilling and
mounting the cradle.
9
PL-020-SS Rev. A4 092016
Advertisement
