Advertisement
Installation (cont.)
1"
Decor Star
4. Using a drill with a tile bit, drill the hole
slowly into the tile. Do not drill into any pip-
ing or wiring in the wall. Insert the anchors
into the wall. (NOTE: Before installing the
wall anchors, use a small piece of painters
tape or masking tape over the drill area.
This will prevent damages to the tile)
5. Secure the mounting brackets to the
wall.
6. Apply thread sealant tape to the thread-
ing on the shut off valves before connect
both hot and cold water supply hoses to the
valves. Turn on the valves and check all
connections for possible leaks.
8
PL-020-SS Rev. A4 092016
Advertisement
