Advertisement
Connectors
-
Two connector for 4 additional external USB 2.0 ports
- One connector for 2 additional external USB 1.1 ports
- One connector for external line-out annd mic-in jacks
- Two internal audio connectors (AUX-in and CD-in)
- One S/PDIF-out connector
-
One connector for IrDA interface
-
Two RAID IDE connectors
-
Two IDE connectors
-
One floppy drive interface supports up to two 2.88MB floppy
drives
-
One ATX power supply connector
- One Wake-On-LAN connector
- One Wake-On-Ring connector
- CPU, chassis and second chassis fan connectors
ATA RAID - Redundant Array of Inexpensive Disk
-
RAID 0 (striping) or RAID 1 (mirroring)
-
Two independent IDE channels support up to 4 drives (UDMA
modes 33/66/100/133 or EIDE)
-
Suppor ts PIO modes 0/1/2/3/4, DMA modes 0/1/2 and
UDMA modes 0/1/2/3/4/5
PCI Bus Master IDE Controller
-
Two PCI IDE interfaces support up to four IDE devices
-
Supports ATA/33, ATA/66, ATA/100 and ATA/133 hard drives
-
UDMA Modes 3, 4, 5 and 6 Enhanced IDE (data transfer rate
up to 133MB/sec.)
-
Bus mastering reduces CPU utilization during disk transfer
-
Supports ATAPI CD-ROM, LS-120 and ZIP
IrDA Interface
The system board is equipped with an IrDA connector for wireless
connectivity between your computer and peripheral devices.
2
English
29
Advertisement
Chapters
