Removing The Compressor - Olimpia splendid Maestro Pro 01925 Service Manual

9.23 Compressor removal
Remove the body (ref. "9.2 Removing the body" on page 39).
Remove the front cover (ref. "9.3 Removing the front cover" on
page 40).
Remove the backrest (ref. "9.4 Removing the backrest" on page
41). Remove the MAIN board box (ref. "9.9 Removing the MAIN
board box" on page 43).
Discharge the refrigerant circuit from the gas (ref. "9.20 Charging/
discharging the coolant" on page 48).
Remove the screws and remove the side panels (1).
1
Move the whole evaporator unit (2) back, handle carefully and
without forcing.
NOTE: Make sure the evaporator assembly is stable before
continuing.
Remove the screw and remove the cap of the electrical
connections (3).
Disconnect the cables (4).
1
Remove the insulation from the pipes (if present)
Place a guard (5) to protect the appliance and proceed with the
desoldering of the pipes in the points (A)(B).
2
3
4
A
B
MAESTRO PRO INVERTER
5
51