Table of Contents
Advertisement
Mount/Connect the Secure Access USB Card
Reader
1. Mount the Card Reader on the shelf on the left side of the MFP front panel using the supplied
Velcro strip. If you have the Convenience Stapler option, place the Card Reader to the right of the
stapler so the Card Reader is between the stapler and MFP. Ensure the Document Handler top
cover can be opened without being obstructed by the Card Reader before attaching the Velcro
strip.
2. Plug the Secure Access USB Card Reader cable into a free USB port on the back of the MFP.
Refer to the MFP System Administration CD for other suggested mounting locations.
Setting Up the Secure Access Hardware
USB Card
Reader
Xerox MFP
Xerox Secure Access Installation Guide
33
Advertisement
Table of Contents
