Secure Access Hardware Component Requirements; Supported Card Readers - Xerox Secure Access Unified ID System Installation Manual

Installation Overview
Secure Access Hardware Component
Requirements
You should ensure that you have all the hardware provided:
Configuration 1
• Power supply
• Power cable
• Bypass key (metal key used to reset the device to defaults) See Resetting an Authentication Device
in the Administration Guide Appendices.
• 10/100 Base-T Ethernet network cable
• Card Reader
OR
Configuration 2
• Secure Access USB Card Reader.

Supported Card Readers

Secure Access supports the following card readers:
• ABA Magstripe
• Mifare (including HID iCLASS readers)
• Legic
• HID 125 kHz
• Indala
• EM Marin
• Hitag
20 Xerox Secure Access Installation Guide