IntelligentAg Recon Blockage Plus Operator's Manual page 22

Recon Blockage Plus™ Operator's Guide
Figure 21: Understanding variance – row view
3.3.1 Monitoring more than one product type
If you are monitoring more than one product type with Recon Blockage Plus™, variance
averages for manifolds are based on the variance of manifolds running the same product type.
EXAMPLE: If you are monitoring the flow of seed and fertilizer pellets that are simultaneously
flowing through the implement in separate manifolds, the variance of a manifold running fertilizer
pellets will only be compared to the flow of other manifolds that are also running fertilizer pellets,
and the variance of a manifold running seed will only be compared to the flow of other manifolds
that are also running seed.
NOTE: If two different product types are running through your implement, verify that you have
correctly assigned each manifold to a product type. Refer to Section 2.2 for instructions for how
to assign product types to manifolds. If you do not correctly assign them, the variance will be
inaccurate and incorrect blockage notices can occur.
600890-000075, rev 1.0 Page 22 of 26