Side (L) Panel, Side (R) Panel - Sony HCD-GT3D Service Manual

HCD-GT3D
Ver. 1.2
Note: Follow the disassembly procedure in the numerical order given.
2-2.

SIDE (L) PANEL, SIDE (R) PANEL

1 two screws 3 three claws
(TAPPING (HEX)
(Type A) or TAPPING
(Type B))
5 panel, side (L)
4 Remove the panel, side (L)
in the direction of the arrow.
10
2 three screws (+BVTP 3 × 8)
Note 1: The screw type which screw between "PANEL, SIDE and PANEL,
TOP" and "PANEL, SIDE and CHASSIS" for this unit have been
changed in the midway of production. About the screw type dis-
crimination, refer to "SCREW TYPE DISCRIMINATION BEFORE
DISASSEMBLE THE PANEL, SIDE" on servicing notes (page 6).
2 three screws (+BVTP 3 × 8)
3 three claws
5 panel, side (R)
1 two screws (TAPPING (HEX)
(Type A) or TAPPING (Type B))
4 Remove the panel, side (R)
in the direction of the arrow.