Installation And Adjustment - Haier XQS60-78 User Manual

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual
It is very important to your security and correct operating the machine.
Install the inner cover component
Before using the washing machine firstly, please install the inner cover component.
1.Open the top lid of the washing machine.
2.Put the inner cover component on the outer tub cover, aiming the inner cover
shaft to the installation hole of the corresponding outer tub cover shaft groove.
3.Firstly insert the inner cover shaft of the left side into the corresponding outer tub
cover shaft groove(see to the figure 1), then hold the middle position of the front of
the outer tub cover with left hand forcibly , handhold the right and below position of
the inner cover with right hand, push the inner cover to the outer cover vertically,
make the inner cover shaft into the corresponding outer tub cover shaft groove(see
to the figure 2). Please install to designated position to guarantee there are no
dropping or abnormal sound in opening and closing of the inner cover, and the
operation shall be smooth. Do not dismount the inner cover component after washing.
Figure 1
Install the bottom plate
After opening the package, please lean the washing
machine gently down on soft items (like towel cloth,
blanket, etc.). Install the bottom plate to the bottom of
the machine with eight screwsby a cross screwdriver,
then lift the machine up gently. See to the figure:
Outer tub cover
Outer tub cover shaft groove
Inner cover shaft
Inner cover component
Right hand
Left hand
Figure 2
Bottom plate Screw
Soft object
Front
Back