Haier XQS60-78 User Manual page 15

After switching on the power, the washing machine will set to common
program including"wash, rinse,spin "automatically. To select other
procedures, push the "soak", " wash", " rinse" or "spin" button
to select the time of soak, wash and spin, and the times of rinse.
After switching on the power, if you push one of the button among
"wash", "rinse"and"spin", the digitron of the former procedures will
turn off automatically. The former procedures will not run. For instance:
after switching on the power. If you push the "spin" button first, it will
execute spin singly after starting.
Attention
.
Even there's no water in the tub, a certain period is
required before spin starting.
Do not use the soak program for the woolen textiles.
Separate the laundries that are not colorfast from
other laundries in washing.
The pulsator will not rotate unless the water is
filled to selected water level(except Normal program).
The soak procedure can work in cooperation with automatic programs like standard, jeans, chemical
fiber and cotton. There is intermittent pulsator stirring during soak.
After the machine starts operation, you can only set the program and procedure during washing,
and can not make setting in other cases.
When you select disinfect program you can use softener. If you don t select disinfect program
the washing machine has no function to use softener please don t put softener into detergent
box.
Press " WATER LEVEL "button,
select suitable water level
After switching on the power, the washing machine will execute fuzzy program automatically to detect
the cloth. After defection, it can set the water level automatically. To select other water level, first push
the "start/pause" button, then push the "water level" button to set the water level. Refer to "water
level button"in Page 11 for selection.
WATER
LEVEL
Page 11