Table of Contents
Advertisement
Adjust the Installation position
The washing machine away from wall should be overrun 20mm. The largest allowable slope of the
shank base of the machine is 1 .The slanting or rough ground will result in unstable running or
stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal:
Hang the lead line to check if it is
horizontal.
Adjust the adjustable leg:
1 .To twist the adjustable leg, please first lift up the
side of the leg slightly, loosen the adjustable nut,
and twist the leg.
2 . After adjustment, fasten the nut.
Usage of the drain hose
The drainage shall be smooth with the drain hose
ut the drain hose up to suitable position. Do not
put it on ground.
Notes: the mouth of drain pipe should higher than
the water level of washing tub for avoiding
to siphon phenomenon during drain.
Do not tramp or press the drain hose.
Fasten
Loosen
High
Low
the adjustable nut
the adjustable feet
Mouth of
drain hose
<1.2m
0.7<H
Hide quick links:
Advertisement
Table of Contents
