Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec BS30WP
Summary of Contents for Trotec BS30WP
- Page 1 BS30WP OPERATING MANUAL SOUND LEVEL MEASURING DEVICE CONTROLLED VIA SMARTPHONE...
-
Page 2: Table Of Contents
• Remove the batteries from the device if you will not be using the device for a longer period of time. • Never short-circuit the supply terminal in the battery compartment! sound level measuring device controlled via smartphone BS30WP... - Page 3 Do not immerse the device and the accessories in The Trotec MultiMeasure Mobile app on the terminal device is water. Make sure that no water or other liquids can used for both operation and the evaluation of the measured enter the housing.
-
Page 4: Information About The Device
Lock Information about the device Technical data Device description Parameter Value Used in combination with Trotec's MultiMeasure Mobile app the sound level measuring device permits the measurement of Model BS30WP noise emissions. Measuring range 35 to 130 dB(A) (31.5 Hz to 8 kHz) -
Page 5: Transport And Storage
• dry and protected from frost and heat • protected from dust and direct sunlight • the storage temperature complies with the values specified in the Technical data • Remove the batteries from the device. sound level measuring device controlled via smartphone BS30WP... - Page 6 ü The Trotec MultiMeasure Mobile app is installed. ü The Bluetooth function on your terminal device is activated. 1. Start the Trotec MultiMeasure Mobile app on the terminal device. 2. Briefly actuate the On / off / measurement button (3) three times to switch on the appSensor.
- Page 7 The indicated measured values will not be saved evaluation. automatically. Info By tapping on the graphic display (9) you can switch over to the numeric display and vice versa. sound level measuring device controlled via smartphone BS30WP...
- Page 8 2. Press the Stop recording button (21). ð The context menu for saving the recording opens. 3. You can optionally save, discard or resume the measurement. sound level measuring device controlled via smartphone BS30WP...
- Page 9 23 Discard button Stops the current recording of measured values saved measurement. measured values. Discards the recorded measured values. 24 Continue button Resumes the recording of the measured values without saving. sound level measuring device controlled via smartphone BS30WP...
- Page 10 Sensors Measurements Reports Customers Settings measurement. Reports 03/26/2019 report 01 report 02 No. Designation Meaning 37 Display reports Opens the selected report. button sound level measuring device controlled via smartphone BS30WP...
- Page 11 Creating a new customer App settings Proceed as follows to create a new customer: Proceed as follows to make settings in the Trotec MultiMeasure 1. Press the Customers button (38). Mobile app: ð The customers overview opens. 1. Press the settings button (41).
-
Page 12: Errors And Faults
ð The appSensor is switched off. menu item Settings => Help. Selecting the menu item Help 2. You may now exit the Trotec MultiMeasure Mobile app on opens a link to the app's help page. You can open a drop-down the terminal device. -
Page 13: Disposal
Declaration of conformity Always dispose of packing materials in an environmentally friendly manner and in accordance with the applicable local We – Trotec GmbH – declare in sole responsibility that the disposal regulations. product designated below was developed, constructed and produced in compliance with the requirements of the EU Radio The icon with the crossed-out waste bin on waste Equipment Directive in the version 2014/53/EU. - Page 14 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...