Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BS30WP
Summary of Contents for Trotec BS30WP
- Page 1 BS30WP OPERATING MANUAL SOUND LEVEL MEASURING DEVICE CONTROLLED VIA SMARTPHONE...
-
Page 2: Table Of Contents
(e.g. when performing measurements along public roads, on building sites etc.). Otherwise do not use the device. • Observe the storage and operating conditions as given in the Technical data chapter. sound level measuring device controlled via smartphone BS30WP... - Page 3 Warning comply with the technical data. Risk of hearing damage! The Trotec MultiMeasure Mobile app on the terminal device is Ensure sufficient ear protection when there are sources used for both operation and the evaluation of the measured of loud sound. There is a danger of hearing damage.
-
Page 4: Information About The Device
Technical data Information about the device Parameter Value Device description Model BS30WP Used in combination with Trotec's MultiMeasure Mobile app the Measuring range 35 to 130 dB(A) (31.5 Hz to sound level measuring device permits the measurement of 8 kHz) noise emissions. Accuracy ±... -
Page 5: Transport And Storage
ü The Trotec MultiMeasure Mobile app is installed. ü The Bluetooth function on your terminal device is activated. 1. Start the Trotec MultiMeasure Mobile app on the terminal device. 2. Briefly actuate the On / off / measurement button (3) three times to switch on the appSensor. - Page 6 Info The indicated measured values will not be saved automatically. Info By tapping on the graphic display (9) you can switch over to the numeric display and vice versa. sound level measuring device controlled via smartphone BS30WP...
- Page 7 2. You can also press the On / off / measurement button (3) on the appSensor. ð The appSensor determines the current measured value which is then displayed on the terminal device. sound level measuring device controlled via smartphone BS30WP...
- Page 8 ð The context menu for sensors opens. 2. Press the Stop recording button (21). ð The context menu for saving the recording opens. 3. You can optionally save, discard or resume the measurement. sound level measuring device controlled via smartphone BS30WP...
- Page 9 Evaluation parameters. They will not be added to the already saved measurement, to be sure, but if you save the measurement again with a different name, these parameters will be added to the initial measurement. sound level measuring device controlled via smartphone BS30WP...
- Page 10 CUSTOMERS SETTINGS Reports Customers Add a customer from your address book / contacts or enter the details for a new customer. Info You can perform a new measurement directly from the input mask. sound level measuring device controlled via smartphone BS30WP...
- Page 11 Calling up customers App settings Proceed as follows to call up an already created customer: Proceed as follows to make settings in the Trotec MultiMeasure 1. Press the CUSTOMERS button (38). Mobile app: ð The customers overview opens. 1. Press the SETTINGS button (41).
-
Page 12: Errors And Faults
ð The appSensor is switched off. menu item Settings => Help. Selecting the menu item Help 2. You may now exit the Trotec MultiMeasure Mobile app on opens a link to the app's help page. You can open a drop-down the terminal device. -
Page 13: Maintenance And Repair
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. sound level measuring device controlled via smartphone BS30WP... - Page 14 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...