Keep all safety signs, stickers and labels in legible Information marked with this symbol indicates that the condition. operating manual must be observed. • Do not open the device. • Observe the storage and operating conditions as given in the Technical data chapter. moisture measuring device BM12...
Information about the device To use the device for its intended use, only use accessories and spare parts which have been approved by Trotec. Device description Improper use By use of the moisture measuring device...
Note the information regarding transport and storage of the device. Transport When transporting the device, ensure dry conditions and and protect the device from external influences e.g. by using a suitable bag. moisture measuring device BM12...
Please proceed as follows for manual switch-off: 1. Press the On/Off button (4) for approx. 3 seconds. ð The device is switched off. Put the protective cap (1) back on the device after use. moisture measuring device BM12...
• If possible, do not measure wood with a temperature below -5 °C. Too low wood temperatures distort the result of the measurement. • Avoid static charge of the material to be measured due to friction. Static charge distorts the measurement result. moisture measuring device BM12...
3. Insert the new batteries in the battery compartment with correct polarity. Repair 4. Slide the cover (6) back on the device. Do not modify the device or install any spare parts. For repairs or device testing, contact the manufacturer. moisture measuring device BM12...
For further return options provided by us please refer to our website https://de.trotec.com/shop/. The separate collection of waste electrical and electronic equipment aims to enable the re-use, recycling and other forms...