Info Information marked with this symbol helps you to carry out your tasks quickly and safely. Follow the manual Information marked with this symbol indicates that the instructions must be observed. energy cost measuring device BX09...
Note To use the device for its intended use, only use accessories and Do not use abrasive cleaners or solvents to clean the spare parts which have been approved by Trotec. device. energy cost measuring device BX09...
BX09 FR Information about the device Device description The device BX09 measures the energy demand of a connected terminal device. The consumption of the device can be displayed in watts, kWh, the price or costs per kWh. The device BX09 is available in different versions for connection to mains sockets in the EU (BX09 EU), Switzerland (BX09 CH),...
Measuring circuit category CAT II, 2500 V Type of protection IP20 Dimensions 97 x 51 x 75 mm (length x width x height) Weight (packaging excluded) 100 g Scope of delivery • 1 x Energy cost measuring device BX09 • 1 x Quick guide energy cost measuring device BX09...
1. Repeatedly press the MODE button (4) until the device is in the display mode for overall consumption since switch-on (KWH display, 10). 2. Press and hold the MODE button (4) for approx. 3 s. ð The overall consumption since switch-on is reset to 0.00. energy cost measuring device BX09...
Only for United Kingdom According to Waste Electrical and Electronic Equipment Regulations 2013 (SI 2013/3113) (as amended) devices that are no longer usable must be collected separately and disposed of in an environmentally friendly manner. energy cost measuring device BX09...