Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BQ30
Summary of Contents for Trotec BQ30
- Page 1 BQ30 OPERATING MANUAL PARTICLE MEASURING DEVICE...
-
Page 2: Table Of Contents
Information marked with this symbol helps you to carry out your tasks quickly and safely. • Never point the laser beam at people or animals. Follow the manual Information marked with this symbol indicates that the operating manual must be observed. particle measuring device BQ30... - Page 3 To use the device for its intended use, only use accessories and When working with a laser of class 2, observe the spare parts which have been approved by Trotec. national regulations on wearing eye protection. Improper use Warning of laser radiation The device may not be used for measurements in liquids.
-
Page 4: Information About The Device
Additionally, a six-level colour display indicating the respective alarm levels helps you to quickly assess the current state of the particle concentration ranging between good and highly critical (see table Alarm limit values for particle concentration). particle measuring device BQ30... - Page 5 : Device is presently not performing a particle measurement. Regardless of the status of the particle measurement the device permanently measures relative humidity, ambient temperature and carbon dioxide concentration. Date and time Date format: YYYY.MM.DD Time format: 12 h or 24 h particle measuring device BQ30...
- Page 6 780 nm, 1.5-3 mW, classified according to DIN EN 60285-1 and the Technical Regulations of the Occupational Health and Safety Ordinance on Artificial Optical Radiation (TROS)) concentration concentration measuring 0 to 9999 ppm range concentration accuracy ± 5 % / ± 75 ppm concentration resolution 1 ppm particle measuring device BQ30...
-
Page 7: Transport And Storage
1. If the device is switched off, press and hold the power button (4) until the colour display turns on. ð An acoustic signal is emitted. ð The device is ready for operation as soon as the start screen is displayed. particle measuring device BQ30... - Page 8 ð Use the buttons (5) and (2) to set the desired system settings' main menu. brightness level. Confirm the entered value by pressing 2. Press the SET / (5) or the MEM / button (2) to select the ENTER button (4). a submenu. particle measuring device BQ30...
-
Page 9: Maintenance And Repair
ð The measured result is additionally displayed as a line graph. 3. Using the buttons (5) and (2) you can browse the list of saved measurement results. 4. Again press the MEM button for approx. 2 s to exit the Memory menu. particle measuring device BQ30... -
Page 10: Disposal
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. particle measuring device BQ30... - Page 11 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...