Advertisement
again to close it, and its indicator light will be off. All the function operation of the
hood will be closed, the hood enters into standby mode, and run by circle.
The speed buttons and lamp button can work separately and not controlled by the
power button. When a certain function button is pressed, the hood operates at that
function status. Press power button
switched off without any functions.
3. Press lamp button
button
and power button
lights. Indicator light of lamp button
like this.
4. Press the
(High) button once, motor runs on high speed, the indicator light of
high button
motor will stop. Indicator light of high button and power button will be off,and run by
circle.
5. Press the
(Mid) button once, motor runs on middle speed, the indicator light of
middle button
the motor will stop. Indicator light of middle button and power button will be off,and
run by circle.
Press the
(low) button once, motor runs on low speed, the indicator light of low
6.
button
and power button
motor will stop. Indicator light of low button and power button will be off,and run by
circle.
Low speed, mid speed and high speed cannot work at the same time. When hood
7.
is on high speed, press low speed, it will turn to low speed at once; when it is in
low speed, press middle speed, it will turn to middle speed immediately, and so on
TROUBLESHOOTING
Fault
Light on, but motor
does not work
once; lights will be turn on. Indicator light of lamp
will lit on. Press lamp button
and power button
and power button
Possible Cause
Fan switch turned off
Fan switch failed
Motor failed
under any status, the cooker hood will be
and power button
will beam. Press high button
will beam. Press middle button
will beam. Press low button
8
again to turn off the
will be off. And recycle
again and the
again and the
Solution
Select a fan switch position.
Contact service center.
Contact service center.
again and
Advertisement
