Table of Contents
Advertisement
Preparation before washing
Pay attention to followings before washing the laundries
Confirm
if
Clear the pocket.
Fasten the
buttons and
there's special
Take out the
requirement for
coins, sand,
zippers.
the laundries.
hairpins etc.
6
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3.Put the drain hose up to suitable position.
<1.2m
4.Slanting or uneven ground may result in
unstable working or abnormal noise. Please
make the machine stand horizontally.
The quantity of
When the pulsator
the laundries
is running , the
shall not exceed
buttons of the
the rated value.
laundries may
The big laundries
cause noise For
like the jeans
The sake of
shall be put in
discretion, please
loosely.
put the laundries
with buttons into
other laundries.
Rinsing
Rinse with water-filing
1.Put the laundries into the wash tub. Select
suitable current according to the laundries.
2.Adjust the water level
Set the water level with water level adjusting
lever according to the laundries quantity.
Then fill suitable water continuously.
3.Rinse
Adjust the wash timer to 5-7 minutes to do
rinsing.
Rinse with stored water
1.Put the laundries into wash tub.Select suitable current according to
the laundries.
2.Fill water to preset water level
3.Rinse
Adjust the wash time to 2-3 minutes to do rinsing.
When the laundries quantity is below 2.4kg,please use STANDARD current.
If you use STRONG current,it may splash.
Using process
Using process
OVERFILL
If the water flows out
of the overfill holes,
that is overfilling
Advertisement
Table of Contents
