Usage Of The Detergent; Washing Sequence - Haier XPB55-13S User Manual

Usage of the detergent

How to use the whitener
Fill water to decided level. Dilute the whitener with container. Pour it slowly into the
washing tub.
Avoid using whitener on laundries with color or pattern as they are prone to lose color.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and quantity of the whitener.
For powder whitener, please dissolve it before using.
How to use the washing powder
Direct dissolved in the machine:
1.Fill small quantity of water.
2.Add the powder . Run for 30 seconds to
dissolve it completely.
3.Put it in the laundries. Select suitable
water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30 C and a container.
2.Add the powder while stirring to fully
dissolve it.
Selection of the quantity of the washing powder
Laundries
Water level
quantity Concentrated washing
Water quantity
MAX (about43L)
3.6kg~5.5kg
2.0kg~3.6kg
MED (about36L)
Below2.0kg MIN (about30L)
Selection of the current , water level and washing time
Laundries
Water level
Current
quantity
Water quantity
MED (about36L)
~
2.4kg~5.5kg Strong
MAX (about43L)
MIN (about30L)
~
Below2.4kg
Standard
MED (about36L)
Using process
Using process
The powder is more prone to pollute the
laundries than the detergent. Therefore
please use it with proper quantity.
It is suggested not to use high sudsing
detergent.
Dosage of different washing powder is
different. Please refer to the instruction
of the washing powder for the detail
dosage.
list 1
Standard dosage
Common washing
powder
powder
About 36g About
43g
About About
30g 36g
About About
25g
30g
list 2
Washing time
Laundries
(minutes)
Knitwear About3~6
Cotton,blending,linen About8~10
Very dirty and thick About10~13
Bed sheet About7~13
Silk(thin laundries) About2~4
Chemical fiber About3~6
Cotton,blending,linen About8~10

Washing sequence

Wash timer Wash selector Water-filling entrance
(To set to below 2 minute, (soft current,
first set to 6 minute then strong current)
turn it back. it can increase
the service life of the timer).
STRONG
OFF
SILK
WOOL
STANDARD
DRAIN
COTTON
LINEN WASH SELECTOR
WASH TIMER
Wash
1.Water inlet selector
(1) Set the water inlet selector at the "WASH" side.
(Figure 1)
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Using process
Using process
Water-filling selector handle
Overfilling sign
Buzzer Spin timer
(The buzzer will ring when (to set to below 1 minute,
the washing finishes) first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
SILK
WOOL
OFF
MAX
BUZZER
SPIN TIMER
WASH SPIN
Figure 1
Figure 2
STRONG
STANDARD
DRAIN
WASH SELECTOR
Figure 3
OFF
SILK
WOOL
Figure 4
COTTON
LINEN
WASH TIMER
STRONG
DRAIN
Figure 5
WASH SELECTOR