Introduction Of The Major Functions; Using Process - Haier XPB55-13S User Manual

Spinning
Selection of the spin time
1. Put the laundries into the spin tub
evenly and smoothly.
2. Press the gland in the tub properly.
Close the inner and outer cover of
the spin tub.
3. Spin
Select suitable spin time according
to the laundries, and do spinning.
During spinning, if there's abnormal
sound, it is generally owing to slanting
placement of the laundries. Please
stop the machine and re-order the
laundries.
In spinning, it will pause the work if you open the outer cover of the spin
tub. Close it to resume the spinning.
To do spinning and draining or rinsing
with water-filling together, please first
do spinning for around 1 minute, then
do draining or rinsing with water-filling.
Otherwise the spinning will stop owing
to too much water stored in the spin tub.

Using process

Using process
list 3
Spin time
Laundries
(minutes)
Bed sheet or
About 4~5
blanket
Underwear
About 2~4
(knitwear)
Swear
About 1~2
(chemical fiber)
Blending thin
Within 1 minute
laundries
Introduction of the major function
The machine has good comprehensive performance, and nice appearance.
It adopts streamline appearance and full plastic shell, which will never get rust.
For the design on safety and reliability, it adopts the wash shelf and water reception
groove design, and reduces the unfavorable influence on the electrical component by the
vapor. Therefore it guarantees more safe and reliable washing.
It adopts complete enclosed base frame and low-noise motor, and thus reduces the
working noise significantly. We can guarantee that the purchase of this machine will bring
you a clean world without disturbing your quiet life.
Foam-removing spinning during high-efficiency rinsing
Use the foam-removing spinning to
remove the extra detergent liquid. It
can both shorten the washing time
and save the water consumption.
Quick water-filling entrance
If you do not need spraying spin, you can
fill water into the wash tub directly through
this entrance. It can reduce the humidity
inside the control panel significantly and
prolong the operating life of the components.
Using process
Using process
Foam-removing
spinning
Spin
Fill water for Spin for about
about 1 minutes 1~2 minutes
Remove most of
Remove the detergent
the foam extra
liquid remained
detergent liquid.
The effect is best when the
laundries quantity is below
80% of the rated value.
Quick water-filling entrance
Water inlet hose
Water inlet jointer
Push
Control handle
Quick water-filling entrance