Safety Precautions - Haier WM7003A User Manual

Safety precautions

Please plug the plug on special 220-240V AC receptacle.
Be sure to use three phase power receptacle.Ensure
the earthing prong of the power receptacle is earth-
ed reliably.Use leakage protector if possible.
Do not bend, stretch, twist, bind the power cord by force, or reformit.
Do not press or clamp it with heavy items. If the power cord and power
plug are bad, or the receptacle is loose, be sure to have it replaced by
the technicians of our special shop or our agent,or the after-sales service
department to avoid any risk.Keep the prong of the power plug clean.If
dust is found on the power plug, please wipe it off with dry cloth.
In case the washing machine is installed on ground with
carpet, do not block the ventilation hole with carpet.
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose, do not use
the plug any more.
In normal usage of the washing machine, the power
plug shall be ready to be pulled or plugged with hand.
Be sure to pull the plug off and close the water faucet
when occurring power failure,delivering the machine,
setting the machine idle or cleaning the machine,Do
not plug or pull the power plug with wet hand.
earth
Do not use water hotter than 50 C .
T h e v e n t i l a t i o n
holes at the bottom
Do not wash water-proof laundry like the raincoat,
bikecovers, down textiles etc. To avoid abnormal
vibrations in spinning and damages to the laundries.
Before Using
Before Using