Download Print this page

Haier W-465 User Manual

Twin-tub washing machine
Hide thumbs


Quick Links

Twin-tub Washing Machine
User's manual
This manual is for
Please read this manual
carefully before using.
Retain it for future reference.



  Related Manuals for Haier W-465

  Summary of Contents for Haier W-465

  • Page 1 Twin-tub Washing Machine User's manual This manual is for W-465 Please read this manual carefully before using. CZ0GA0E0R Retain it for future reference.
  • Page 2: Table Of Contents

    Contents Names of the parts - - - - - - - - - - - - - - - - - 1 Safety precautions - - - - - - - - - - - - - - - - - 2 Installation and adjustment - - - - - - - - - - - 4 Preparation before washing - - - - - - - - - - 6 The musts in washing - - - - - - - - - - - - - - - 7...
  • Page 3: Names Of The Parts

    Names of the parts Wash selector Wash timer Outer cover of the spin tub Water-filling entrance Inner cover of the spin tub Control panel Spin timer Water-filling translation Major frame Overflow filter Water level adjusting lever Spin tub Wash tub Cabinet Valve cover Pulsator...
  • Page 4: Safety Precautions

    Safety precautions Please insert the power cord into When the machine is normally special receptacle with rated vol- using, please put the power plug tage. Be sure to use single-phase at the location easily to be insert- three pins receptacle. The earthing ed and extracted by hand.
  • Page 5 Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.).
  • Page 6: Installation And Adjustment

    Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package, please take out the lint filter from the document bag, install it to the overflow filter of the wash tub.
  • Page 7: How To Change The Direction Of The Drain Hoses

    How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Side sectional view Drain hose Fixing hook Extend the drain hose from the side of spin tub fixing hook installation hole Drain hose Pull outwards...
  • Page 8: Preparation Before Washing

    Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose .
  • Page 9: The Musts In Washing

    The musts in washing The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity.
  • Page 10: Washing Sequence

    Washing sequence Overflow sign Wash timer Wash selector Spin timer (To set to below 2 minute, (standard current, (to set to below 1 minute, first set to 6 minute then Water inlet strong current) first set to 2 minute then turn it back.
  • Page 11 Ï ´ µ Ó Ð ë Ö ª Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push...
  • Page 12: Rinse With Water-Filling

    Rinsing Rinse with water-filling 1.Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing.
  • Page 13 Spinning 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries.
  • Page 14: Disposal After Washing

    Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing.
  • Page 15: Cleaning The Overflow Filter

    Cleaning the overflow filter 2. Take off the corrugation pipe. Water level Dismantle the upper part of the adjusting lever corrugation pipe inside overflow filter ( as indicated in Corrugation Figure 1). Pipe 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water.
  • Page 16: Trouble-Shooting Answer To Question

    Trouble-shooting Answer to question When the remained water is frozen Prevent the freezing (be sure to discharge the water completely after using) After complete draining, set the "WASH SELECTOR" at "STRONG" or "STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt. Below 50 c 2~3L When the water is frozen...
  • Page 17 Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
  • Page 18: Packing List *Specification

    Packing list Quantity Name One piece User's manual One piece Water inlet hose One piece Lint filter One piece Gland One set Twin-tub washing machine Speciafication Water level/Water quantity (L) (about) Maximum/58 Medium/49 Minimum/43 Injection pressure(Mpa) 0.02 0.2 Washing capacity(kg) Spinning capacity(kg)