Put In The Detergent - Haier WM7003A User Manual

3 Put in the detergent

How to use the whitener
Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.
Avoid using whitener on laundries with colour or
pattern as they are prone to lose colour.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and
quantity of the whitener.
For powder whitener, please dissolve it before use.
Standard dosage of the detergent and water quantity
Water
level
Turn the detergent box down before adding the detergent.
Add the concentrated composite washing powder into the box
directly as indicated in the left figure.
See to following table for the dosage of the washing powder.
How to use the washing powder
Water
quantity
Add 40g in each 30L water
About 57L
About 53L
About 49L
About 45L
About 42L
About 38L
About 34L
About 30L
About 27L
About 22L
Using process
Using process
Direct dissolved in the machine
1.Fill water to "2" water level
2.Add the powder. Run for 30 seconds to dissolve
it completely.
3.Put in the laundries. Select suitable water level.
The instant dissolving of the washing powder:
1. Prepare warm water of 30
2. Add the powder while stirring to fully dissolve it.
The powder is more prone to pollute the laundries than
the detergent. Therefore please use it with proper quantity.
It is suggested not to use high sudsing detergent.
Different washing powders have different dosage.
Please refer to the usage manual of the washing
powder for the details.
Common powder,
About 76g
About 70.5g
About 65g
About 60g
About 56g
About 50.5g
About 45g
About 40g
About 36g
About 29g
and a container.
Concentrated powder,
Add 25g in each 30L water
About 47.5g
About 44g
About 41g
About 37.5g
About 35g
About 31.5g
About 28g
About 25g
About 22.5g
About 18g