Man D 2842 LE 620 Repair Manual page 173

Special tools for high- and low-temperature coolant pump
Fig. no. Designation
36 Pressing plate / pressing in the coolant pump bearing,coolant pump shaft
and V-belt pulley
37 Pressing mandrel / pressing the axial face seal into the pump housing
38 Base plate for various pressing jobs
39 Pressing mandrel / pressing the deep-groove ball bearing into the HT
pump housing
40 Support for coolant pump housing for pressing on the V-belt pulley
41 Support for coolant pump housing for pressing in the V-belt pump shaft
42 Press-in mandrel for axial face seal
43 Assembly device for pump housing
consisting of::
43.1 Plate
43.2 Pick−up pins
43.3 Mouting bolts
44 Detachable handle for all press−in plates and clamps
consisting of::
44.1 Handle
44.2 Disc
45 M5 bolt with left−handed thread for installing coolant pump
46 Centring pin for installation of coolant pump
47 Bush for pressing in end cover (no fig.)
Special tools
171
Item number
80.99604−0251
80.99604−0252
80.99614−0027
80.99604−0254
80.99606−0628
80.99606−0629
80.99617−0191
80.99606−6128
80.99606−0631
80.99606−0632
06.02192−0308
80.99617−6006
80.99617−0187
80.99617−0144
80.99606−0642
80.99606−0643
80.99604−0263