Connecting The Appliance To A Wlan Home Network (Wi-Fi) Without Wps Func- Tion - Siemens WM14VPH4GB User Manual And Installation Instructions

Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
15.1 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
Requirements
¡ Your router has a WPS function.
¡ Wi-Fi is activated on the router.
¡ The Wi-Fi basic setting is activated
on the appliance.
→ "Activating Wi-Fi on the appli-
ance", Page 34
¡ The appliance receives signals
from the WLAN home network (Wi-
Fi) at its installation location.
¡ The Home Connect app is installed
on your mobile device.
Press and hold Remote Start
1.
at least 3 seconds.
a The display shows Aut.
Press Start/Reload.
2.
Press the WPS button on the
3.
router within the next 2 minutes.
Take note of the information in the
documents for your router.
flashes on the display.
a
a The device connects to the Wi-Fi
home network.
a If the display shows and
up permanently, the appliance is
connected to the Wi-Fi home net-
work.
If the appliance is not connected
4.
to the Wi-Fi home network, the dis-
play shows Err.
‒
‒
Connect the appliance to the
5.
Home Connect app. → Page 34
15.2 Connecting the appli-
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually.
Requirements
¡ Wi-Fi is activated on the router.
¡ The Wi-Fi basic setting is activated
on the appliance.
→ "Activating Wi-Fi on the appli-
ance", Page 34
¡ The appliance receives signals
from the WLAN home network (Wi-
Fi) at its installation location.
for
¡ The Home Connect app is installed
on your mobile device.
Press and hold Remote Start
1.
at least 3 seconds.
a The display shows Aut.
Set the programme to position 2.
2.
a The display shows SAP.
Press Start/Reload.
3.
a
a The appliance now sets up its own
lights
Wi-Fi home network with the name
(SSID) HomeConnect.
Call up the Wi-Fi settings on the
4.
mobile device.
Home Connect en
Check whether the appliance is
within the range of the Wi-Fi
home network.
Reconnect the appliance to the
Wi-Fi home network with WPS
function.
ance to a WLAN home
network (Wi-Fi) without
WPS function
flashes on the display.
for
33