Connecting The Appliance To A Wlan Home Network (Wi-Fi) Without Wps Func- Tion - Siemens XQG100-WM14U7B0HW User Manual

Table of Contents

Advertisement

a If the display shows con and
lights up permanently, the appli-
ance is connected to the Wi-Fi
home network.
If the appliance is not connected
4.
to the Wi-Fi home network, the dis-
play shows Err.
Check whether the appliance is
within the range of the Wi-Fi
home network.
Reconnect the appliance to the
Wi-Fi home network with WPS
function.
Connect the appliance to the
5.
Home Connect app. → Page 36
15.2 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) without
WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually.
Requirements
¡ Wi-Fi is activated on the router.
¡ The Wi-Fi basic setting is activated
on the appliance.
→ "Activating Wi-Fi on the appli-
ance", Page 36
¡ The appliance receives signals
from the WLAN home network (Wi-
Fi) at its installation location.
¡ The Home Connect app is installed
on your mobile device.
Press and hold
1.
3 seconds.
a The display shows "Aut".
Set the programme to position 2.
2.
a The display shows "SAP".
Press
.
3.
flashes on the display.
a
for at least
a The appliance now sets up its own
Wi-Fi home network with the name
(SSID) HomeConnect.
Call up the Wi-Fi settings on the
4.
mobile device.
Connect the mobile device to the
HomeConnect Wi-Fi network and
enter the Wi-Fi password (key)
HomeConnect.
a Your mobile device connects to
the appliance. The connection pro-
cess may take up to 60 seconds.
Open the Home Connect app on
5.
your mobile device and carry out
the steps in the app.
In the Home Connect app, enter
6.
the network name (SSID) and
password (key) for your home net-
work.
Carry out the steps in the
7.
Home Connect app to connect the
appliance.
a If the display shows con and
lights up permanently, the appli-
ance is connected to the Wi-Fi
home network.
If the appliance is not connected
8.
to the Wi-Fi home network, the dis-
play shows Err.
Check whether the appliance is
within the range of the Wi-Fi
home network.
Reconnect the appliance to the
Wi-Fi home network with WPS
function.
Connect the appliance to the
9.
Home Connect app → Page 36.
Home Connect en
35

Advertisement

Table of Contents
loading

Table of Contents