Table of Contents
Advertisement
en Home Connect
16.3 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) without
WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually. The appliance
briefly sets up its own Wi-Fi network.
You can connect a mobile device to
the WLAN network and transfer the
network information for the WLAN
home network (Wi-Fi) to your appli-
ance.
Requirement: The Home Connect
app is open and you have logged on.
Press and hold
1.
3 seconds.
a The display shows Aut.
Set the programme to position 2.
2.
a The display shows SAP.
Press inicio/pausa+carga.
3.
flashes in the display.
a
a The appliance now sets up its own
Wi-Fi network with the name (SSID)
HomeConnect.
Call up the Wi-Fi settings on the
4.
mobile device.
44
for at least
Connect the mobile device to the
HomeConnect Wi-Fi network and
enter the password (key) Home-
Connect.
a Your mobile device now connects
to the appliance. The connection
process may take up to
60 seconds.
Open the Home Connect app on
5.
your mobile device and carry out
the steps in the app.
In the Home Connect app, enter
6.
the network name (SSID) and
password (key) for your home net-
work.
Carry out the steps in the
7.
Home Connect app to connect the
appliance.
a If the display shows and
up permanently, the appliance is
connected to the home network.
If the display shows Err, the appli-
8.
ance is not connected to the home
network.
Check whether your appliance is
‒
in range of your home network.
Reconnect the appliance to the
‒
WLAN home network (Wi-Fi)
with WPS function.
Connect your appliance to the
9.
Home Connect app → Page 45.
lights
Advertisement
Table of Contents
