Installation And Adjustment - Haier HWM70-10A User Manual

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Install the bottom plate
After you open the package, please lean the washing
machine gently down on soft items (like the towel cloth,
blanket, etc.).
Install the bottom plate to the bottom of the machine
with the eight screws by a cross screwdriver, then
lift the machine up gently. See to the right Figure:
Adjust the Installation position
The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in
unstable running or stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal
Hang the plumb to confirm it's
Adjust the adjustable foot
(1) To twist the adjustable foot at the right front of
the cabinet (front the sight of front), please first
lift up the side of the foot slightly, loosen the
adjustable nut, and twist the foot.
(2) Fasten the nut after adjustment.
horizontal
Before Using
Before Using
Loosen
High
Low
adjustable nut
Fasten
adjustable foot