Power Management Setup Option - ECS P4IBAS2 Manual

Power Management Setup Option

This option lets you control system power management. The
system has various power-saving modes including powering
down the hard disk, turning off the video, suspending to RAM,
and software power down that allows the system to be auto-
matically resumed by certain events.
The power-saving modes can be controlled by timeouts. If the
system is inactive for a time, the timeouts begin counting. If
the inactivity continues so that the timeout period elapses, the
system enters a power-saving mode. If any item in the list of
Reload Global Timer Events i s Enabled, then any activity on
that item will reset the timeout counters to zero.
If the system is suspended or has been powered down by
software, it can be resumed by a wake up call that is gener-
ated by incoming traffic to a modem, a LAN card, a PCI card,
or a fixed alarm on the system realtime clock,
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
ACPI Function
ACPI Suspend Type
Power Management
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-Off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
Wake Up On LAN
x USB KB Wake-Up From S3
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
** Reload Global Timer Events **
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Power Management Setup
[Enabled ]
[S1(POS)]
[User Define]
[DPMS]
[Yes]
[Stop Grant]
[3]
[Disable]
[Disable]
[Instant-Off]
[Enable]
[Enable]
[Enabled]
Disabled
[Disabled]
0
0 0 0
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
54
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults