Table of Contents
Advertisement
Date and Time
The Date and Time items show the current date and time on
the computer. If you are running a Windows OS, these items
are automatically updated whenever you make changes to the
Windows Date and Time Properties utility.
IDE Devices (None)
Your computer has two IDE channels (Primary and Secondary)
and each channel can be installed with one or two devices
(Master and Slave). Use these items to configure each device
on the IDE channel.
Press <Enter> to display the IDE submenu:
CMOS Setup Utility – Copyright © 1984 – 2001 Award Software
IDE HDD Auto-Detection
IDE Primary Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
IDE HDD Auto-Detection
Press <Enter> while this item is highlighted to prompt the
Setup Utility to automatically detect and configure an IDE de-
vice on the IDE channel.
Note: If you are setting up a new hard disk drive that sup-
ports LBA mode, more than one line will appear in
the parameter box. Choose the line that lists LBA
for an LBA drive.
IDE Primary Master
Press Enter
[Auto]
Menu Level
[Auto]
To auto-detect the
0 MB
HDD's size, head . . . on
this channel
0
0
0
0
0
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
F7:Optimized Defaults
42
Item Help
F1:General Help
Advertisement
Table of Contents
