Power Management Setup Option - ECS P6VXM2 Manual

Power Management Setup Option

This option displays items that let you control the system power
management. Modern operating systems take care of much of
the power management. This mainboard supports ACPI (Ad-
vanced Configuration and Power Interface). The system has
various power saving modes including powering down the hard
disk, turning off the video, suspending to RAM, and a software
power down that allows the system to be automatically resumed
by certain events.
Power Management Timeouts
The power-saving modes can be controlled by timeouts. If the
system is inactive for a time, the timeouts begin counting. If the
inactivity continues so that the timeout period elapses, the sys-
tem enters a power-saving mode. If any item in the list of Reload
Global Timer Events is Enabled, then any activity on that item
will reset the timeout counters to zero.
Wake Up Calls
If the system is suspended, or has been powered down by soft-
ware, it can be resumed by a wake up call that is generated by
incoming traffic to a modem, a LAN card, a PCI card, or a fixed
alarm on the system realtime clock,
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
ACPI Function
Power Management
ACPI Suspend Type
PM Control by APM
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-Off by PWRBTN
AC Resume Function
Wake Up Events
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Power Management Setup
Enabled
Press Enter
S1(POS)
Yes
Suspend --> Off
DPMS Support
3
Instant-Off
Always Off
Press Enter
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
55
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults