Table of Contents
Advertisement
Removing wire and fixed pull-out (extendible) guides
Removing and replacing the oven door and glass panes
A
Hold the guides by the bottom side and
pull them towards the center of the oven cavity.
B
Remove them from the openings at the top.
INFORMATION!
When removing the guides, take care not
to damage the enamel coating.
1
First, fully open the door (as far as it will go).
2
Oven door is attached to the hinges with
special supports that also include safety levers.
Rotate the safety levers towards the door by
90°. Slowly close the door to a 45° angle
(relative to the position of the fully closed door);
then, lift the door and pull it out.
Oven door glass pane can be cleaned from
the inside, but it has to be removed from the
appliance door first. First, proceed as described
under item 2, but do not remove it.
3
Remove the air guide. Hold it on the left-
and right-hand side of the door with your
hands. Remove it by slightly pulling it towards
you.
4
Hold the door glass at the upper edge and
remove it. To the same for the second and third
glass pane (depending on the model).
5
To replace the glass panes, observe the
reverse order.
29
Advertisement
Table of Contents
