Trycom Technology TRP-C31S User Manual page 18

STEP3. Enter the COM Port number that TRP-C31S connect using, click "OK"
STEP4. Press the "Space bar" the TRP-C31S firmware setting screen will show.
You can set the TRP-C31S by Console mode.
7-3.Using Telnet
Telnet can be used to configure the TRP-C31S Serial Server from any PC on the LAN. The
Telnet window displays the same configuration information shown in Console Mode and allows
server properties to be configured. See chapter 6 for details on Server Properties.
Ensure the PC and TRP-C31S are connected to the LAN, and the serial server is in RS-232,
RS-422 or RS-485 mode before you can telnet to it and access the configuration screens. From
the Desktop, click Start, and then run. The Run dialogue box will open. Type in Telnet and the IP
address of the Serial Server which to be configured, click OK.
cele mai sensibile
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ electricfilm.eu@gmail.com ▪ SUPORT TEHNIC ▪ 0788 250583
ECHIPAMENTE PENTRU AUTOMATIZĂRI
18